Littelfuse SP1305 TVS Diode Arrays

Author : Littelfuse Published Time : 2019-04-29
Littelfuse SP1305 TVS Diode Arrays are designed to protect sensitive equipment from damage due to electrostatic discharge (ESD), electrical fast transients (EFT), and lightning-induced surges. SP1305 can absorb repetitive ESD strikes above the maximum level specified in the IEC 61000-4-2 international standard without performance degradation. This Littelfuse TVS diode series can safely dissipate up to 5A of 8/20μs induced surge current (IEC-61000-4-5, 2nd edition) with very low clamping voltages. Applications include industrial equipment, test and medical equipment, point-of-sale (POS) terminals, motor controls, legacy ports (RS-232 and RS-485), and security and alarm systems.

Features

ESD, IEC 61000-4-2, ±30kV contact, ±30kV airEFT, IEC 61000-4-4, 50A (5/50ns)Lightning, 5A (8/20μs as defined in IEC 61000-4-5 2nd edition)Low clamping voltage

Specifications

5.0A peak pulse current (tp=8/20µs)-40°C to +125°C operating temperature range30pF typical, 40pF maximum diode capacitance±30kV ESD withstand voltage

Applications

Industrial equipmentTest and medical equipmentPOS terminals
Littelfuse Newest

Littelfuse KC Epoxy Coated Thermistors offer superior long-term reliability characteristics especially suitable for temperature measurement, control, and compensation applications.

Date: 2019-09-06

Littelfuse SP3384NUTG 3.3V 15A Diode Array is available at Mouser Electronics and provides protection against ESD, CDE, EFT, and lightning surges for high speed data lines.

Date: 2019-09-04

Littelfuse TSM250 PolySwitch® Resettable PPTCs feature two 250V Telecom PPTCs in a single plastic housing to provide tip and ring overcurrent protection and aid compliance with ITU-T K.20, K.21, and K.45 as well as Telcordia GR-1089 intra-building.

Date: 2019-08-27

Littelfuse 400M Surface-Mount Fuses provide overcurrent protection to circuits that operate under high operating temperatures of up to +150°C.

Date: 2019-08-27

Littelfuse 5 Stud and 7 Stud ZCASE FHZ Fuse Holders are configurable products designed for primary high-current power distribution.

Date: 2019-08-21

Littelfuse SP3401 TVS Diode Arrays feature a 6.5 to 11.5V breakdown voltage range, 10A peak current, and 100nA reverse leakage current.

Date: 2019-08-13

Littelfuse AQ3400 1pF ±30kV Diode Array is available at Mouser Electronics and provides protection for electronic equipment that may experience destructive ESD.

Date: 2019-08-09

Littelfuse 8.0SMDJ Series TVS Diodes are designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

Date: 2019-07-30